1/4" Drive - 12 point Universal/Swivel Sockets SAE & METRIC MSRP: Was: Now: $60.00 - $85.00 Choose Options
Field Inspection Kit Another custom kit built at the request of several mechanics. If you can dream it up, we can build it. Blacklight (Coast PX75, For finding oil leaks as long as your oil has the dye) Flashlight (Nebo - Rechargeable) Mirror Telescoping Magnet Tap... MSRP: Was: Now: $320.00 Add to Cart
Main Rotor Blade Stand/Rack Blade Stand/Rack is 10ft long when assembled, 30in long when stored. MSRP: Was: Now: $3,600.00 Add to Cart
Oil and Hydraulic Can Funnels Funnel for gallon and quart sized cans. Pour oil and hydraulic fluid without spills or contamination, and store the half-used can withoutleaks. The FunnelCap takes the mess and the risk out of servicing engine, gearbox and hydraulicsystems... MSRP: Was: Now: $15.00 Choose Options
Low Profile #2 Phillips Low profile #2 phillips bit to get into super tight locations. MSRP: Was: Now: $29.00 Add to Cart
Field Maintenance Sheet Metal Field maintenance sheet metal kit for small jobs that any mechanic should be able to do anywhere. Contains: Rivet Squeeze with 1.5" and 3" Yoke 1ea Rivet Set: 2 flush sets and 3/32", 1/8", 5/32", & 3/16" universal head sets 1ea Blind Rivet... MSRP: Was: Now: $525.00 Add to Cart
Heavy Duty Mast Work Table Table DOES NOT include splined wrench. Used to securely take apart and assemble mast assemblies. Due to the high torque on mast bearing nuts, the old way of clamping the mast into a vice may allow the mast to rotate and pivot on the vice which can... MSRP: Was: Now: $2,750.00 Add to Cart
1/4" Drive - 12 point Universal/Swivel Sockets SAE & METRIC We have located some quality swivel sockets at an affordable price that we are happy to offer here! They are made by Genius Tools. SAE (6pc) set consists of 1/4", 5/16", 3/8", 7/16", 1/2", & 9/16" Metric (9pc) set consists of 6mm, 7mm, 8mm, 9mm,... MSRP: Was: Now: $60.00 - $85.00 Choose Options
1/4" Drive Breaker Bar 1/4" drive breaker bar that is perfect for our special tools and replaces a ratchet that is always rotating. You should be fighting the helicopter, not your tools. Works great with the 407 Hydraulic Pump Wrenches. MSRP: Was: Now: $15.00 Add to Cart
3/4" Drive Ratchet *EXCESS INVENTORY* 3/4" Drive Ratchet for a price you won't find anywhere else. These are extras from a kit we purchase and do not use the ratchet. So we are offering it reasonably priced. MSRP: Was: Now: $50.00 Add to Cart
Pin Gauges For Inspecting Splines All pin gauges are 2 inches long unless otherwise specified. Pin gauges can be modified for different lengths for an extra fee. If you do not see the diameter pin you need, let us know. We can have them here the very next day. We try to keep all... MSRP: Was: Now: $32.00 - $540.00 Choose Options
10X Magnifying Glass We chose this model of magnifying glass because the cup is setup for the correct focal distance. Just place the magnifying glass on the object you are trying to inspect and you are focused. No fighting the loupe trying to figure out the correct focus... MSRP: Was: Now: $12.00 Add to Cart
Dykem Cross Check Torque Stripe We have this torque stripe in orange only MSRP: Was: Now: $10.00 Add to Cart
Bolt Extractor This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Pressure is applied to the bolt and not to the tail boom fitting. Cracked fittings require tail boom removal at lots of... MSRP: Was: Now: $225.00 Add to Cart
Slide Hammer Shorter than commercial slides to pop out fuel pump cartridges in the belly when there is little ground clearance available.Comes with 7/16 20 and a 1/4 28 thread adapters. MSRP: Was: Now: $90.00 Add to Cart
Reversible Swing Wrenches These reversible swing wrenches are an improvement over our other wrenches. We are using the reversible Gear wrench brand so when you get into a tight spot and can't get the wrench off the nut or bolt you can simply flip the reversing lever and back out... MSRP: Was: Now: $95.00 - $105.00 Choose Options
Brass Screwdriver For Compass Adjustment No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.This is a quality, solid brass screwdriver made especially for adjusting compasses.It's 4 3/4 inches long and the blade tip is 5/32" wide. MSRP: Was: Now: $23.00 Add to Cart
Big A$$ Screwdriver The shaft is 14-15 inches long. The handle is about 5" long and is made from 1 1/2 inch knurled aluminum. There is a 9/16" nut welded to the shaft right next to the handle. You can put extra torque on it with a 9/16" wrench. There is also a hole drilled... MSRP: Was: Now: $65.00 Add to Cart
Rolls-Royce 250 Exhaust Stack Wrench Wrench is made for removal of the nuts on the exhaust stack. Keeps nuts from falling into crevices of the engine. MSRP: Was: Now: $30.00 Add to Cart
Composite Tap Hammer Use the tap hammer on main rotor blades or any other composite material to check for delamination. Equivalent to T75449-2 Aluminum: Softer impact. Good for thin laminates or delicate surfaces where you don’t want to... MSRP: Was: Now: $30.00 Choose Options
Grease Fittings These are the threaded ones, not the quick disconnect ones that get grease everywhere except the part you want it in. MSRP: Was: Now: $15.00 - $25.00 Choose Options
90° Grease Coupler I recently found this 90 degree grease coupler that works great on hard to access grease fittings.Works really well on the oil cooler blower bearings on the Bell 407. It slides in from the side when straight on access is difficult or next to impossible. MSRP: Was: Now: $16.00 Add to Cart
Jackscrews 1/4" 28 - 3pcs Use these on transmission input quills, freewheeling unit, tailrotor gearbox, or any component requiring 1/4" 28 jackscrews. T101308 MSRP: Was: Now: $75.00 Add to Cart
Torque Adapters 1/4" Drive Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter. SAE: The standard set consists of 1/4", 5/16", 3/8", &... MSRP: Was: Now: $50.00 - $200.00 Choose Options
Oil Can Opener One Black Plastic "Church Key" FOD Free Turbine Oil Can Opener A certified, FOD-free way to open turbine oil cans. Built for aircraft mechanics who cannot riskdebris in the oil. Opening a can of turbine oil with a screwdriver or a knife... MSRP: Was: Now: $7.00 Add to Cart
