BO105

8 of 8 Items
  • Grease Fittings Grease Fittings Grease Fittings

    Grease Fittings

    These are the threaded ones, not the quick disconnect ones that get grease everywhere except the part you want it in.

    $15.00 - $25.00
  • 90° Grease Coupler 90° Grease Coupler

    90° Grease Coupler

    I recently found this 90 degree grease coupler that works great on hard to access grease fittings.Works really well on the oil cooler blower bearings on the Bell 407. It slides in from the side when straight on access is difficult or next to impossible.

    $16.00
  • Torque Adapters 1/4" Drive Torque Adapters 1/4" Drive Torque Adapters 1/4" Drive

    Torque Adapters 1/4" Drive

    Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.   SAE: The standard set consists of 1/4", 5/16", 3/8", &...

    $50.00 - $200.00
  • BO105 Holding Jam Nut To Torque

    BO105 Holding Jam Nut To Torque

    Holding jam nut to torque or remove the main rotor hub studs on the bottom of the hub. Screw this on to the stud, hold a back up on the lower nut and tighten the bolt. Slide a socket over the large nut and torque to specs. 

    $80.00
8 of 8 Items