10X Magnifying Glass We chose this model of magnifying glass because the cup is setup for the correct focal distance. Just place the magnifying glass on the object you are trying to inspect and you are focused. No fighting the loupe trying to figure out the correct focus... MSRP: Was: Now: $20.00 Add to Cart
Bolt Extractor This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Pressure is applied to the bolt and not to the tail boom fitting. Cracked fittings require tail boom removal at lots of... MSRP: Was: Now: $225.00 Add to Cart
Composite Tap Hammer Use the tap hammer on main rotor blades or any other composite material to check for delamination. You can order somewhere else for $15 + $12 shipping ($27 total) or just bundle with your next order with us. Equivalent to T75449-2 MSRP: Was: Now: $24.00 Add to Cart
206 & 407 Tailboom Maintenance Stand 206 & 407 Tailboom Maintenance StandCall for more information.Maintains tailboom at chest level for maintenance. Able to rotate 360 degrees. MSRP: Was: Now: $0.00 Add to Cart
Torque Adapters 1/4" Drive Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter. SAE: The standard set consists of 1/4", 5/16", 3/8", &... MSRP: Was: Now: $50.00 - $170.00 Choose Options
407 Lifting Clevis T102137-107 T102137-111Not much to say about this item. I think everyone knows what it's for. MSRP: Was: Now: $1,975.00 Add to Cart
407 Tailboom Torque Check Socket 9/16" 12 point socket per Bell specs to comply with the 407 tailboom torque checks due every 300 hours on ASB-407-10-93. Bell P/N 407-230-001-101 Also helps comply with: ASB 407-24-134 ASB 407-22-128 AD 2022-27-08 AD CF-2022-68 MSRP: Was: Now: $40.00 Add to Cart
TB407-18-127 Vertical Fin Tail Skid Mod Fixture, bushings and bolts needed to locate and drill new hole in vertical fin tail skid p/n 206-020-110-103 at the attachment hole location.Lead time is about 4-5 weeks as the bushings and bolts must be ordered from an outside supplier. And they are... MSRP: Was: Now: $525.00 Add to Cart
407 Horizontal Stabilizer Bit Reduced shank #2 Phillips bit for removing and installing the screws in the slats on the 407 horizontal stabilizer. Previously P/N: 5750A89 MSRP: Was: Now: $4.00 Add to Cart
Bell 407 Tailboom/Fuselage Former Ring Fixture Used for replacing tailboom/fuselage former ring or tail boom attach fittings on the Bell 407 only.The top two holes are larger than the 206. This fixture comes with 2 drill bushings. One for the top holes and one for the bottom holes. A 3/16... MSRP: Was: Now: $900.00 Add to Cart
